Mixers and skip hoists

2-HOLE HALF-ROUND HOLDER0.00 kr.

Varenr. 6160320

300-4500 l mixers

2-hole half-round holder for installing Haarup mixer shovels, rubber blocks are included.

2-HOLE REAR PLATE FOR MIXER SHOVEL0.00 kr.

Varenr. 6160300

500-4500 l mixers

The rear plate is designed to fit all sizes of Haarup mixers.

4-HOLE HALF-ROUND HOLDER 52 MM DIAMETER0.00 kr.

Varenr. 6160950

All Haarup mixers

Cast half-round holder, rubber blocks are included.

AIR FILTER FOR GEAR 3/4"0.00 kr.

Varenr. 2180800

All Haarup mixers

Filter kit for Haarup's mixer gears.

ALMATEK GENERAL PURPOSE LUBRICANT0.00 kr.

Varenr. 5811500

All Haarup mixers

Grease for lubrication of seals on Haarup mixers.

BOTTOM PROBE, CERAMIC0.00 kr.

Varenr. 6150280

All Haarup mixers

Particularly wear-resistant bottom probe used for Haarup's cast steel wearing plates. Distance rings and sealing kit are included with the probe.

BOTTOM PROBE, POLYURETHANE0.00 kr.

Varenr. 6150350

All Haarup mixers

Particularly wear-resistant bottom probe for Haarup's cast wearing plates. Distance rings and sealing kit are included with the probe.

CASTOR FOR HOIST BUCKET0.00 kr.

Varenr. 6211000

300-750 l mixers

Castor including hub for hoist bucket.

CASTOR FOR HOIST BUCKET0.00 kr.

Varenr. 6211100

1125-1500 l mixers

Castor including hub for hoist bucket.

CASTOR FOR HOIST BUCKET0.00 kr.

Varenr. 6211200

2250-3000 l mixers

Castor including hub for hoist bucket.

CASTOR FOR HOIST BUCKET0.00 kr.

Varenr. 6211220

3750-4500 l mixers

Castor including hub for hoist bucket.

CTSA FILTER INSERT0.00 kr.

Varenr. 2180810

All Haarup mixers

CTSA-70-40 insert for air filters on Haarup's mixer gears.

DISCHARGE SHOVEL SEGMENT, MARTENSITE0.00 kr.

Varenr. 6161220

300-4500 l mixers

Martensite discharge shovel segment including bolts, nuts and O-rings.

DISCHARGE SHOVEL SEGMENT, POLYURETHANE0.00 kr.

Varenr. 6161200

300-4500 l mixers

Polyurethane discharge shovel segment including bolts, nuts and O-rings.

DISCHARGE SHOVEL SEGMENT, RUBBER0.00 kr.

Varenr. 6161210

300-4500 l mixers

Discharge shovel segment in wear-resistant rubber including bolts, nuts and O-rings.

 

DISCHARGE SHOVEL, POLYURETHANE0.00 kr.

Varenr. 6160500

1500 l mixers

Polyurethane discharge shovel including bolts, nuts and O-rings.

DISCHARGE SHOVEL, RUBBER0.00 kr.

Varenr. 6160450

1500 l mixers

Discharge shovel made from wear-resistant rubber including bolts, nuts and O-rings.

ELEMENT FOR COUPLING HRC 180 CHLOROPEN0.00 kr.

Varenr. 3500550

1125-1500 l mixers

Elastic element for installation in the mechanical coupling between the motor and the hydraulic coupling.

ELEMENT FOR COUPLING HRC 230 CHLOROPEN0.00 kr.

Varenr. 3500650

2250-4500 l mixers

Elastic element for installation in the mechanical coupling between the motor and the hydraulic coupling.

HOIST WIRE ROPE FOR 1125/1500 L MIXERS0.00 kr.

Varenr. 3909150

1125-1500 l mixers

Hoist wire rope including thimble and wire lock (Ø12 x 36.3 m - tensile strength 12 050 kp).

HOIST WIRE ROPE FOR 2250 L MIXERS0.00 kr.

Varenr. 3909200

2250 l mixers

Hoist wire rope including thimble and wire lock (Ø13 x 43.5 m - tensile strength 13 850 kp).

HOIST WIRE ROPE FOR 300/375 L MIXERS0.00 kr.

Varenr. 3909000

300-375 l mixers

Hoist wire rope including thimble and wire lock (Ø9 x 17.6 m - tensile strength 6 450 kp).

HOIST WIRE ROPE FOR 3000/3750 L MIXERS0.00 kr.

Varenr. 3909400

3000-3750 l mixers

Hoist wire rope including thimble and wire lock (Ø16 x 42 m - tensile strength 21 250 kp).

HOIST WIRE ROPE FOR 4500 L MIXERS0.00 kr.

Varenr. 3909450

4500 l mixers

Hoist wire rope including thimble and wire lock (Ø18 x 43.5 m - tensile strength ???? kp).

HOIST WIRE ROPE FOR 500 L MIXERS0.00 kr.

Varenr. 3909050

500 l mixers

Hoist wire rope including thimble and wire lock (Ø11 x 20.5 m - tensile strength 9.800 kp).

HOIST WIRE ROPE FOR 750 L MIXERS0.00 kr.

Varenr. 3909100

750 l mixers

Hoist wire rope including thimble and wire lock (Ø12 x 19.6 m - tensile strength 12 050 kp).

HYDRO-MIX 7 & 8 REPLACEMENT KIT WITH SPECIALLY HARDENED STEEL WEARING RING, CERAMIC PLATE AND BOLTS0.00 kr.

Varenr. 14435810

Hydro-Mix VII and VIII

Kit for replacement of Hydro-Mix VII and VIII microwave probe. The kit is used for replacing the ceramic probe head when changing the wearing plates in the mixer.

HYDRO-MIX 8 SENSOR STANDARD MODE 0-20 MA WITH SPECIALLY HARDENED STEEL WEAR RING0.00 kr.

Varenr. 1443580

Hydromix 8

Hydro-Mix 8 sensor standard mode 0-20 mA with special hardened steel wearing ring that fits to Haarups special hard cast wearing plates.

MIXER ARM, TYPE BI0.00 kr.

Varenr. 6161500

500-3000 l mixers

Arm for mixer shovel in Haarup's 500-3000 l mixers.

MIXER SHOVEL, POLYURETHANE0.00 kr.

Varenr. 6160050

300-375 l mixers

Polyurethane mixer shovel including bolt, nuts and O-rings.

MIXER SHOVEL, POLYURETHANE0.00 kr.

Varenr. 6160150

500-4500 l mixers

Polyurethane mixer shovel including bolts, nuts and O-rings.

MIXER SHOVEL, RUBBER0.00 kr.

Varenr. 6160100

500-4500 l mixers

Mixer shovel in wear-resistant rubber including bolts, nuts and O-rings. 

MIXER SHOVEL, STEEL0.00 kr.

Varenr. 6160200

500-4500 l mixers

Cast steel mixer shovel including bolts, nuts and O-rings.

This mixer shovel is used for the abrasive materials.

PROTECTIVE CAP FOR MIXER ARM0.00 kr.

Varenr. 6163090

750-4500 l mixers

Protective cap for Haarup's mixer arms. The cap increases the lifetime of the mixer arms as it provides additional protection in the areas that are most exposed to wear and tear.

REAR PLATE FOR SIDE SCRAPER TYPE X0.00 kr.

Varenr. 6161320

500-2250 l mixers

REAR PLATE FOR SIDE SCRAPER TYPE XX0.00 kr.

Varenr. 6161310

300 l mixers

 

REAR PLATE FOR SIDE SCRAPER TYPE XXX0.00 kr.

Varenr. 6161370

4500 l mixers

REAR PLATE FOR SIDE SCRAPER TYPE XXXI0.00 kr.

Varenr. 6161390

3000-3750 l mixers

SAFETY LIMIT SWITCH WITH PROTECTIVE CAP0.00 kr.

Varenr. 6107800

750-4500 l mixers

Safety limit switch with protective cap including installation bracket, hinges and activation pin.

SEAL FOR INSPECTION HATCH IN MIXER COVER0.00 kr.

Varenr. 6350410

All Haarup mixers

Special seal for tightening the inspection hatch on the mixer.

SIDE SCRAPER SEGMENT, POLYURETHANE0.00 kr.

Varenr. 6161140

300-375 l mixers

Polyurethane side scraper segment including. bolts, nuts and O-rings.

SIDE SCRAPER SEGMENT, POLYURETHANE0.00 kr.

Varenr. 6161150

500-4500 l mixers

Polyurethane side scraper segment for side scraper arm including bolts, nuts and O-rings.

SIDE SCRAPER SEGMENT, RUBBER0.00 kr.

Varenr. 6161160

500-4500 l mixers

Side scraper segment in wear-resistant rubber including bolt, washer and nut.

SIDE SCRAPER SEGMENT, RUBBER0.00 kr.

Varenr. 6161161

500-4500 l mixers

Side scraper segment in wear-resistant rubber including bolt, washer and nut (horizontal hole).

SIDE SCRAPER SEGMENT, STEEL0.00 kr.

Varenr. 6161170

500-4500 l mixers

Cast steel side scraper segment including bolts, nuts and O-rings.

TOP SHOVEL, POLYURETHANE0.00 kr.

Varenr. 6160380

3750 l mixers

Top shovel for additional mixing of materials.