Haarup mixer

Item number: 5811500

Almatek General Purpose Lubricant

Grease for lubrication of seals of Haarup mixers. Available in both tubes, as in the photo, and in 16 kg buckets (5811505).

Data sheet.

500 - 4500 L mixer

Item number: 6160100

Mixing shovel of rubber

Mixing shovel of rubber, incl. bolts, nuts and O-rings

500 - 4500 L mixer

Item number: 6160150

Mixing shovel of polyurethan

Mixing shovel of Polyurethane, incl. bolts, nuts and O-rings

500-4500 L mixer

Item number: 6160200

Mixing shovel of cast iron

Mixing shovel of cast iron, incl. bolts, nuts and O-rings

This mixing shovel is used for the hardest materials only.

300 - 375 L mixer

Item number: 6160050

Mixing shovel of polyurethane (300)

Mixing shovel of Polyurethane, incl. bolts, nuts and O-rings

This shovel is used for the smaller 300 - 375 L mixers

3750 L mixer

Item number: 6160380

Top shovel polyurethane

Top shovel of wear resistant Polyurethane incl. bolts

500 - 4500 L mixer

Item number: 6161160

Side scraper segment of rubber

Side scraper of rubber incl. bolts, nuts and O-rings

500-4500 L mixer

Item number: 6161161

Side scraper segment of rubber

Side scraper segment of rubber, incl. bolts and O-rings (horizontal fittings)

500-4500 L mixer

Item number: 6161150

Side scraper segment of polyurethane

Side scraper of Polyurethane incl. bolts, nuts and O-rings

500 - 4500 L mixer

Item number: 6161170

Side scraper of cast iron

Side scraper of cast iron, incl. bolts, nuts and O-rings

300 - 375 L mixer

Item number: 6161140

Side scraper segment of polyurethane (300)

Side scraper of polyurethane incl. bolts, nuts and O-rings

This scraper is for the smallest mixers 300 - 375 L

1500 L mixer

Item number: 6160450

Discharge shovel of rubber

Discharge shovel of rubber incl. bolts, nuts and O-rings

1500 L mixer

Item number: 6160500

Discharge shovel of polyurethane

Discharge shovel of polyurethane incl. bolts, nuts and O-rings

300 - 4500 L mixer

Item number: 6161210

Discharge shovel segment of rubber

Discharge shovel segment of rubber, incl. bolts, nuts and O-rings

300 - 4500 L mixer

Item number: 6161200

Discharge shovel segment of Polyurethane

Discharge shovel segment of Polyurethane, incl. bolts, nuts and O-rings

300 - 4500 L mixer

Item number: 6161220

Discharge shovel segment of Martensit

Discharge shovel segment of Martensit, incl. bolts, nuts and O-rings

300 L mixer

Item number: 6161310

Rear plate for installation of segment (300) type XX

The segment is used in the 300 L Haarup mixer

500 - 2250 L mixer

Item number: 6161320

Rear plate for installation of segment (500-2250) type X

Rear plate for installation of segment (500-2250) type X

3000 - 3750 L mixer

Item number: 6161390

Rear plate for installation of segment (3000-3750) type XXXI

The segment is for 3000 - 3750 L Haarup mixers

4500 L mixer

Item number: 6161370

Rear plate for installation of segments (4500) type XXX

The segment is for the 4500 L Haarup mixer

300-4500 L mixer

Item number: 6160320

2-hole half-round retainer incl. 2 rubber blocks

2-hole half-round retainer incl. 2 rubber blocks

500-4500 L mixer

Item number: 6160300

2-hole rear plate for mixing shovel

The rear plate fits all sizes of the Haarup mixer.

Item number: 6160950

4-hole half-round retainer dia. 52mm (3000-4500)

4-hole half-round retainer dia. 52mm incl. rubber (3000-4500)

Item number: 6350410

Seal for inspection door

Special seal to keep inspection door tight

1125 - 1500 L Mixer

Item number: 3500550

Element for coupling HRC 180 neoprene

Elastic coupling element, placed in mechanical coupling between motor and hydraulic coupling

2250 - 4500 L Mixer

Item number: 3500650

Element for coupling HRC 230 neoprene

Elastic coupling element, placed in mechanical coupling between motor and hydraulic coupling.

Haarup mixer

Item number: 6150280

Ceramics probe dia.133mm

Ceramics probe dia.133mm

Haarup mixer

Item number: 6150350

Bottom probe (replacement) polyurethane

Bottom probe (replacement) polyurethane

Hydromix VI

Item number: 1443551

Hydromix 6 replacement ceramic and protection ring kit.

Hydromix 6 replacement ceramic and protection ring kit.

Hydromix VII

Item number: 1443581

Hydro-Mix 7 replacecment set

Hydro-Mix replacement set with specially hardened steel wear ring, ceramic plate and bolts.

Hydromix VII

Item number: 1443580

Hydro-Mix sensor standard mode

Hydro-Mix 7 sensor standard mode 0-20 MA with specially hardened steel wear ring.

300 - 750 L Mixer

Item number: 6211000

Wheel for hoist bucket

Wheel for hoist bucket incl. bearing and hub

 

1125-1500 L Mixer

Item number: 6211100

Wheel for hoist bucket

Wheel for hoist bucket incl. bearing and hub

2250-3000 L Mixer

Item number: 6211200

Wheel for hoist bucket

Wheel for hoist bucket incl. bearing and hub

3750 - 4500 L mixer

Item number: 6211220

Wheel for hoist bucket

Wheel for hoist bucket incl. bearing and hub

300 - 375 L mixer

Item number: 3909000

Hoist rope - 300 - 375 L mixer

Hoist rope Ø9 right L = 17M incl. thimble & wire lock.

500 L mixer

Item number: 3909050

Hoist rope - 500 L mixer

Hoist rope Ø11 right L = 20,5M incl. thimble & wire lock.

750 L mixer

Item number: 3909100

Hoist rope - 750 L mixer

Hoist rope Ø12 length = 19,6M incl. thimble & wire lock.

1125/1500 L mixer

Item number: 3909150

Hoist rope - 1125/1500 L mixer

 

Hoist rope Ø12 length = 36,3M incl. thimble & wire lock. 

2250 L mixer

Item number: 3909200

Hoist rope - 2250 L mixer

Hoist rope Ø13 length = 41,5M incl. thimble & wire lock.

3000/3750 L mixer

Item number: 3909400

Hoist rope - 3000/3750 L mixer

Hoist rope Ø16 length = 42M incl. thimble & wire lock.

4500 L mixer

Item number: 3909450

Hoist rope - 4500 L mixer

Hoist rope Ø18 length = 43,50M incl. thimble & wire lock.

500-3000 L mixer

Item number: 6161500

Mixing arm type BI

Mixing arm type BI for 500 - 3000 L Haarup mixers.

750-4500 L mixer

Item number: 6163090

Protective casing for mixer arm.

Protective casing for mixer arm, polyurethan.

Haarup mixer

Item number: 2180800

Breather filter for gearbox 3/4"

Breather filter for gearbox 3/4" TSA-70-34 

This is a complete filter. On picture 2 you can see where the filter is placed on the mixer.

Haarup mixer

Item number: 2180810

Breather filter element CTSA-70-40.

Breather filter element CTSA-70-40.

This is the filter insert which is placed inside the black filter.
 

Mixer 750-4500

Item number: 6107800

Covering safety limit switch 1 door

Safety limit switch with protective casing, fitting to be welded on the mixer, hinges and activating pawl (750-4500).